Encapsulation and characterisation of grape seed proanthocyanidin extract using sodium alginate and different cellulose derivatives

Grape seed proanthocyanidin extract (GSPE) has health benefits. However, these phenolic compounds undergo degradation reactions and have undesirable sensorial characteristics. GSPE was encapsulated using sodium alginate (SA), SA-methyl cellulose (MC) and SA-hydroxypropyl methylcellulose (HPMC) for promoting controlled release, pH stability, temperature and storage period tolerance of GSPE. The microcapsules were characterised using scanning electron microscopy (SEM) and Fourier transform infra-red (FTIR) analysis. The SA-MC and SA-HPMC microcapsules appeared to have a more compact surface than SA-alone microcapsules. FTIR analysis indicated successful immobilisation of GSPE into the polymeric microcapsules. Moreover, the SA-MC and SA-HPMC microcapsules showed higher thermal stability. The microcapsules showed a relatively higher amount of released GSPE at a pH above six than at a lower pH. The SA-MC and SA-HPMC microcapsules could be used to retain more GSPE content in the gastric phase and to release it in the intestinal phase for possible absorption. Furthermore, after 28 days of storage at 25 °C, the GSPE retention rate of the microcapsules was still higher than 80%. GSPE encapsulated in SA-MC and SA-HPMC microcapsules results in lesser degradation and can be absorbed more effectively. This method has potential for the delivery of colon-specific materials while exhibiting a sustained-release characteristic.     

Effects of methyl cellulose-based coating on physiochemical properties and chemical hazards of Chinese fried dough cake during storage

Coating has been used as a practical method to ensure the physiochemical properties and reduce the chemical hazard of fried foods. Methyl cellulose (MC) was used as a coating material to pretreat Chinese fried dough cake (CFDC) before frying. The results showed that the water content, hardness and L* value of the 1% MC coated sample were 31.67%, 848.54 g and 51.62, respectively, at the seventh day at 25 °C. Coating contents 1% MC could reduce the oil content, hardness, and extent of browning and improve the physiochemical properties of CFDC on 7 days of storage. Coating contents 1% MC also reduced the acid value, peroxide value, p-anisidine value, malondialdehyde content, 4-hydroxy-2-(E)-hexenal content, 4-hydroxy-2-(E)-nonenal content, acrylamide content and glycidyl ester content in CFDC on 7 days of storage. Our work contributes to the control of the oil content and chemical hazards for fried food during storage by applying an edible coating.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

Facile construction of cellulose/layered double hydroxides nanocomposite membranes with high strength and antibacterial properties

High-strength regenerated cellulose/ZnAl-layered double hydroxides (LDH) composite membranes (RCL) with good mechanical and antibacterial performance were developed by stirring vigorously cellulose and LDH in NaOH/urea aqueous solvent system at −12°C. The obtained cellulose/LDH composited materials were characterized and the results indicated that well dispersion of LDH in the cellulose matrix. The tensile strength of RCL membranes were enhanced to 92.1 MPa from 68.3 MPa for that of RC film because of the strong interfacial interaction between the LDHs and cellulose matrix as well as the high rigidity of the LDHs. The addition of LDH into the cellulose could improve the thermal stability, water resistance, and flame retardant of the regenerated cellulose film. Zn²⁺ ions were exited in the cellulose/ZnAl-LDH materials, leading to good antibacterial activities against Staphylococcus aureus and Escherichia coli, which is important for RCL composite materials in antibacterial packaging filed.     

Fabrication of bacterial cellulose with high efficient loading of Ag and TiO2 nanoparticles for removing organic dyes

As a new advanced oxidation technology, photocatalytic technology has broad application prospects in the field of wastewater treatment. However, in the actual use process, there will be difficulties in catalyst recovery and reuse. This article successfully prepared bacterial cellulose (BC) loaded silver and titanium dioxide nanoparticles (Ag-plated TiO₂/BC composite pellicle) by in situ embedding method. BC not only works as the carrier to load TiO₂ and Ag NPs but also adsorbs dyes to promote the reaction. As a reusable photocatalytic film, it is convenient to use and recycle in terms of testing and characterization compared with powders. The results show that Ag and TiO₂ nanoparticles were closely embedded in BC. We evaluated the photocatalytic degradation performance of the catalyst on methylene blue (MB), active red X-3B, and Rhodamine B. When the reaction time was 2 h, the dye removal rates were 71%, 68%, and 82.6%. At the same time, through the inhibition zone experiment, it was found that the material has a certain inhibitory effect on both Escherichia coli and Staphylococcus aureus. Therefore, the supported catalyst prepared by this method has the advantages of high catalytic activity, relatively stable property, easy recovery, and tailorability, making it potentially applicable in sewage post-treatment links.     

Phosphorylated cellulose/electrospun chitosan nanofibers media for removal of heavy metals from aqueous solutions

Contamination of water resources by toxic heavy metals has significant impacts on environmental and human health. Their removal from aqueous media is essential to ensure water sustainability and to provide safe freshwater availability to population. Electrospun chitosan (CS) nonwoven mats are efficient at removing heavy metals from aqueous media. However, they suffer from low permeability and low-mechanical strength. They are also unable to remove contaminants in a nonselective way. A bilayer sorbent media made of a porous phosphorylated cellulose substrate covered by electrospun CS nanofibers was developed to overcome those weaknesses. The hydrophilic composite shows good water permeability and mechanical strength with appropriate thermal and chemical characteristics. Adsorption tests with Cd(II) indicate that pseudo-second order and Langmuir models best fitted experimental data, with a maximum adsorption capacity of 591 mg/g at 25°C. Adsorption with multielement samples containing Cr(VI), Cu(II), Cd(II), and Pb(II) also reveal their capability to remove them in a selective way. This mechanically resistant, hydrophilic, and permeable adsorbent media was able to capture both cationic and anionic metallic contaminants.     

Synthesis,Characterization, Speciation,and Biological Studies on Metal Chelates of Carbohydrates with Molecular Docking Investigation

The role of starch aerogel (St-AG) and carboxymethyl cellulose (CMC) as biolgical active compounds, when they subjected for complexation with metal ions, is assessed in this work. The complexation is carried out with palladium(II) and copper(II) ions, in solid state. Different tools of analysis are carried out to characterize and elucidate the structures of these complexes, namely: elemental analysis, IR, thermal analysis, magnetic measurement and molar conductance techniques. All synthesized complexes are formed with 1:2 (metal:ligand) stoichiometry except the case of aerogel starch 1:1 (Pd:starch). All isolated complexes show a satisfactory cytotoxic effect results against colon cancer cell lines HCT11. Additionally, these complexes are screened for their antibacterial activities against two types of Gram positive and negative bacteria. Molecular docking investigation confirmed the cytotoxicity and antibacterial results. Proton–ligands association constants and their complex formation constants with some bivalent metal ions, using potentiometric method show that the complexes formed in solution have a stoichiometry of 1:1 [metal:ligand]. The effects of metal ion, ionic radius, electronegativity and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3D transition metals followed the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺.     

Re-Printable Chiral Photonic Paper with Invisible Patterns and Tunable Wettability

The construction of invisible patterns via high-resolution printing and the independent encoding/decoding of complex information can lead to promising applications in steganography and watermarking for optical encryption. Herein, a rewritable chiral photonic paper formed by cholesteric cellulose nanocrystals and polycation is reported. The chemically crosslinked polycation network interpenetrates in the cholesteric structure while retaining the optical properties of the photonic crystals. The film exhibits controllable wettability via anion exchange, leading to extremely low contrast in the dry state but high contrast by a rapid wetting response. Triple invisible information is independently encoded on the films, including invisible patterns caused by reversible counterion-controlled wettability, permanent fluorescent labels based on fluorescent counterions, and polarization-dependent structural colors based on cholesteric structures. Full color patterns can be reversibly constructed via inkjet printing, with a high resolution of 100 µm. In addition, the circular polarization characteristics of the cellulose nanocrystals, liquid crystals, endow the system with complex and independent responses, realizing a wetting/polarization double-key decryption. This work provides a simple and effective optical technique for coding complex information on a single material platform and expands the techniques available to achieve invisible patterns for sensing and anti-counterfeiting.     

An Injectable Hydrogel for Simultaneous Photothermal Therapy and Photodynamic Therapy with Ultrahigh Efficiency Based on Carbon Dots and Modified Cellulose Nanocrystals

The convenience of injectable hydrogels that can provide high loading of diverse phototherapy agents and further long-time retention at the tumor site has attracted tremendous interest in simultaneous photothermal and photodynamic cancer therapies. However, to incorporate the phototherapy agents into hydrogels, complex modifications are generally unavoidable. Moreover, these phototherapy agents usually suffer from low efficiency and work at different irradiation wavelengths outside the near infrared windows. Hence, a method for the fabrication of an injectable hydrogel for simultaneous photothermal therapy and photodynamic therapy, through the Schiff-base reaction between amido modified carbon dots (NCDs) and aldehyde modified cellulose nanocrystals is proposed. The NCDs act as both phototherapy agents and crosslinkers to form hydrogels. Significantly, the NCDs demonstrate an extremely high photothermal conversion efficiency of 77.6% which is among the highest levels for photothermal agents and a high singlet quantum yield of 0.37 under a single 660 nm light-emitting diode irradiation. The hydrogels are examined through in vitro and in vivo animal experiments which show nontoxic and effectively tumor inhibition. Thus, the strategy of direct reaction of phototherapy agents and the matrix not only provides new strategies for injectable hydrogel fabrication but paves a new road for advanced tumor treatment.     

High-precision green densities of thick films and their correlation with powder,ink, and film properties

A precise geometrical method employing optical profilometry for green density measurements of thick films is presented that provides a typical reproducibility of 0.1–0.2% theoretical density (TD) and a measurement uncertainty of 0.2–0.4% TD for layer thicknesses of around 50 μm. The procedure can be applied for all thick films with a dried thickness of 10 μm or greater. In a case study, the green densities of screen-printed zirconia layers were investigated as a function of the starting powders (grain sizes from 0.1 to 0.4 μm), the solid content, the chain length of ethyl cellulose as binder and its concentration, and two different dispersants and their concentration. Rheological ink properties, surface roughness, drying stresses from deflection measurements, the mechanical properties of green films, and the equivalent compaction pressure were measured and correlated with the green density data. Compressive binder forces and lubrication effects dominated the packing of the particles.